View Single Post
  #3  
Old 12-22-2021, 08:12 PM
chf1971's Avatar
chf1971 chf1971 is offline
VideoKarma Member
 
Join Date: Aug 2021
Location: Western MD
Posts: 12
CROSS Pattern Line Width

Thanks for the reply.

I should of provided some History of the TV Set.
I received it in Original un-touched condition.
On the Main Circuit Board all of the Couplets have been replaced with new Couplets received from "The TVrestorer guy ". On the MAIN Board, several of the Film Cap's in the Vertical Section have been replaced. Only the Couplets have been replaced in the Horizontal Section. Unit's Primary Power Supply Filter Electrolytics have been replaced. Vertical Linearity Potentiometer has been replaced. Video I.F. Board is still all Original. Thus, I suspect that the Horizontal Section can have out of tolerance caps / resisitor components. The Focus Adjustment's, nor any real Alignment Procedures have Not been performed.

Thank you for any of your suggestions.

Last edited by chf1971; 12-22-2021 at 08:18 PM.
Reply With Quote