Quote:
Originally Posted by Kevin Kuehn
Let's get one thing straight here. B+ is not suppose to get to pins 5 and 6 of the 6AQ5 through C50. C50 is a audio signal coupling cap to the top of the volume control. C50's function is to pass the audio signal from the plate of the detector to the audio output grid. A capacitor is used because it's intended to block the B+ feeding the plate of the detector tube from getting into the grid circuit of the 6AQ5.
|
Well either way I'm not getting any audio out of the TV and I'm still not getting the 200+ volts I need to be getting on pins 5 and 6 of the 6AQ5 tube that the Sam's calls out and I'm not getting 17V on pin 2 of the 6AQ5 either, so I'm still stumped as to what's going on with the audio section of this TV, and I've still got no signal from the tuner to the TV on here either.