Quote:
Originally Posted by vortalexfan
OK so here's some pictures of the Audio Section of my Zenith Bugeye TV, and of all of the Electrolytic caps I replaced in the TV.
I added some visual markers and texts to each of the photos so you can tell what's what in each photo.
See pictures below.
|
I think I see a problem but it's tough to see everything in your photo. Take a look at my orange circled area's. All 3 circled points should be interconnected. Inside the largest circle there should be 4 items soldered together. The + side of C3B, the right lead from R56(470 ohm feed from B+), left lead of R54(390k), and a orange wire should head over to the second solder pocket from the right end of the terminal strip directly below the 6AQ5 socket. From that same solder pocket another orange wire should be connected to pin 6 of the 6/5AQ5, and also the red lead from the audio output transformer should be soldered into that same pocket. But specifically I can't see any wire coming over to that solder pocket from the positive end of C3B(large circled point)? You can reference the photo from my set. In any event that's the path B+ needs to follow to get from C3B over to the audio output tube.
