|
[QUOTE=vortalexfan;3240312]OK, so I'm not quite sure how the belt sizing works on the site you linked to me, the belt's overall Diameter that I need is a little over an inch give or take a quarter inch because its not a very big belt, and as I said, I don't have the original belt to go by as the original belt had disintigrated years ago.[/QUOTE
If you don't have an original belt then you use an old trick I learned from VCR repair man. Take some dental floss and wrap it around both pullys. Then over lap it and then pull the slack out and then cut it. Then take the dental floss and lay it out in straight line on a flat surface and pull all the slack out of it. Then measure with a ruler then dived it by .4 and that should give you size of belt you need. Thats way i do and it's always worked, but it can be trick so good luck.
|