|
I'm not familiar with the 465, but if it's like my 466 the connector on the end of the cable coming off the tester is the standard 10BP4 base that almost all CRTs before 1960 used, and it's wired such that you don't need an adapter to connect it to the tubes it can plug into.
I have most of the adapters for mine I need for the stuff I care about, but I built a universal adapter too. I had a junk scope tube with a 10BP4 style base (with all ~14pins populated) I robbed that base and added alligator leads to the red/B&W pins. I can test any tube if I can find a datasheet with a pinout. It has served me well on 2 different 15GP22s (doubt I'll find that adapter).
|