Quote:
Originally Posted by Ed in Tx
Re-read your post. It's probably OK depending where it is in the circuitry. I wouldn't necessarily trust Sam's as gospel either! Might have been a change during production.
If I had that machine first thing I would be doing is checking every electrolytic in it with my ESR meter. I actually have two, one I used at the shop and the other for home use, it's that important and useful.
|
Unfortunately my ESR Meter died recently (the LCD Display won't come on anymore) and it was one of those "kit" units that you could get on ebay for $10 (the one that could come either cased or uncased.)
The Sam's for this VCR is from 1987 and my VCR is from 1984...
