Quote:
Originally Posted by Yamamaya42
That should be a start point then in tracking down the lack of sound, even though the linked Rider's may or may not be exact to what you have, the voltages shown should be close enough to give you a hint of the problem.
be it a bad tube, or resistor or cap or what ever.
the voltages on the 6K6 and 6AT6 should be pretty close to matching what you see in the schematic.
|
So looking at the Riders and the audio output 6K6, I'm looking at 6.3 AC on pins 8, 7 and 2, -14 volts DC on pin 5, 185 volts DC on pin 3 and 200 volts DC on pin 4? Do you concur?