Quote:
Originally Posted by Tom9589
When I looked at the two pictures of the chassis out of the cabinet, I noticed that there were two transformer cans with a piece of black tape over the top adjustment hole. Any idea why they were covered? Was it a way of the manufacturer to discourage "diddlers" from adjusting these cores?
|
no idea why it's like that
Good news is, the HV rect is OK!
bad news is, my patchwork did not hold.
the HV blasted through / around the heat shrink tubing and found a path to grd and arced again, I guess i should not have clipped it down
now time for more drastic measures.
http://suzaku.live-evil.org/0717221306.jpg
huge piece of tubing filled with silicone
this will take many hours to cure
and If it's dry enough to put pack together late tonight, I will slop more on it.
hope to be ready to power it again mon night.