Quote:
Originally Posted by Notimetolooz
How do you know that there is HV?
Once you have something like the ion trap adjusted it isn't useful to go back and mess with it without a logical reason.
If the HV is OK and the set had raster before then something like the voltages on the CRT socket have changed. Check them.
|
I checked the anode with a HV probe...5 KV which is what I had before when I had a picture. I can't keep the ion trap on because this CRT is not attached to the chassis and it needs to be removed whenever I want to turn the chassis on its side to do work or analysis underneath although I did mark position and orientation on the trap and CRT neck with a Sharpie. I had a pattern from a signal generator before. I'll check the CRT voltages. Thanks!