Quote:
Originally Posted by bandersen
I'd say a lot closer  Yes, it is a vertical issue. Looks like foldover and you have way too much height. Remember the viewing area is a 4:3 aspect ratio rectangle - it's not a porthole set. You should have about 1-1/2" blank at the top and bottom.
Reduce the height and adjust the vertical linearity and see where that gets you. |
Hey there...I've tried dozens of adjustments and combinations using the vertical linearity and height. The image is centered as per the dot in the middle of the crosshatch. One observation, the height pot is very sketchy. The deflection collapses with a tiny turn and then resets. I do have a spare height pot. Maybe the pot is bad? I've already replaced the linearity pot which was very bad. Would a bad height pot possibly account for the top and bottom folds?