|
You still have yet to determine what the Ma load is at the point between the connection of x2/c1 – L54, as mentioned, you will have to put your amp meter in series to see if you have excessive load , more than 580 ma,
and as been mentioned by others, check for voltage drop across circuit breaker M7.
Check for 147vAC on the secondary.
Check for voltage drop across plug & Socket 2 ( 9 – 8 )
And if you STILL find nothing, & current is within normal, your voltage doubler could simply be under preforming with your chosen new caps.
I would still recommend larger ones 180uf @200 647-UCY2D181MHD3 and these diodes 78-SF4007
I have used this combo many times w/o any problems.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|