Quote:
Originally Posted by Notimetolooz
I didn't want to interfere in the effort but I took a look at the Leader LGC-396 manual and it does not mention a 1KHz sound signal.
If it did that could be used to get the discriminator at least in the ballpark.
The way a NTSC RF signal is produced is that the sound signal (1KHz lets say) is FM modulated onto a 4.5MHz carrier, then that sound (sub)carrier is added to a video signal, that combined video signal is AM modulated onto a RF channel frequency carrier. The result is that there is a FM sound subcarrier that is offset from video carrier by 4.5MHz.
Do you have an oscilloscope?
|
When I hooked the Leader up to my Zenith for testing, there was a tone. I'll check again this evening. My Conar generator definitely has one. Yes I have a Tektronix and a Heathkit scope