Quote:
Originally Posted by Penthode
This is good.
If it is as low as 91MHz that would explain why you are getting picture and no sound. The screw is made of brass so that means turning the screw clockwise should bring the frequency up. However, because the inductance for each channel is in series, the higher channels, likely 5 or 6 may be out. I would start with turning clockwise the 4 screw. If the screw becomes tight before reaching 93MHz, let us know.
|
So I should tune the radio back to 93MHz and adjust the slug for channel 4 clockwise until the radio is silent? Also, what about my CRT question?