[timmy]

What was happening is I was turning the horizontal hold- oscillator and that’s what was making the oscillator stop or not start so both hot are at -45v I adjusted the coil voltages look good on the oscillator tube but now I’m trying to figure out why I cannot get an image on the screen so I’ll have to figure out a video source to try or the video detect diode may be bad. But I fear that the L6 may have been fooled with because inside looks like it has been turned but I do get something on the screen but can’t make out if it’s a distorted image it changes using the fine tune and it comes close. I still have sound. If L6 was turned from what I see on the screen then it may not be to far out. And b+ voltages are good now since I changed the damper.