|
Well I went over all resistors on all 3 IF tubes and the only one on 2 was a 1.6k that measured 2k that’s it. Is it likely that a disc to ground may be bad ? I still have a hunch that L6 may have been touched it looks like it was moved looking in the adjustment hole. Do you know how to check a germanium diode get a reading on ohms both ways where one side flashes numbers back and forth. And so again if there is sound then the video rides along so I think I could exclude the tuner.
Last edited by timmy; 09-06-2022 at 03:26 PM.
|