Quote:
Originally Posted by timmy
Maybe there’s something going on with k1 that I made all resistances seem to check out ok but I’ll probably put the original k1 back in because the k1 is agc and tied to all of this madness.
|
the hot coil problem is most likely due to a faulty C96, But you can't get the exact replacement for it, it may even be what burned r145.
it can be replaced with 2 caps in series,
https://www.mouser.com/ProductDetail...rjw6zMJw%3D%3D
https://www.mouser.com/ProductDetail...EPCXzdjw%3D%3D
this is unrelated to K1
2 3kv caps in series that = 6kv@132pf total
get 2 new 1000v 2amp power diodes at the same time.