|
.
I'm wondering about the path of current through L42, I think the thinking that C96
could have been shorted to send high voltage & a current path through L42 is not
correct. But the regular current path of from Pin 5 to Pin 1. Since the flyback
windings are low ohms, that's a lower voltage, & high current source.
Much higher current than the HV winding... Transformer Basics....
How is that 10 Ohm resistor R136, I know you probably
checked it 4 times already....
So do you have control of the HV adjust?
Does it work?
.
__________________
Yes you can call me "Squirrel boy"
|