11-07-2022, 05:31 AM
|
 |
VideoKarma Member
|
|
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
|
|
Quote:
Originally Posted by Username1
.
I'm wondering about the path of current through L42, I think the thinking that C96
could have been shorted to send high voltage & a current path through L42 is not
correct. But the regular current path of from Pin 5 to Pin 1. Since the flyback
windings are low ohms, that's a lower voltage, & high current source.
Much higher current than the HV winding... Transformer Basics....
How is that 10 Ohm resistor R136, I know you probably
checked it 4 times already....
So do you have control
.
|
. Hv adjust works ok 10pm resistor is 11 ohms
|