I got her running at least. Still waiting on a few parts to come in to try and finish it.
The "mica" caps in here are all shot too, i had to change one. Need to change the rest as its acting like it has "silver mica disease" in the picture sometimes. Also sometimes the horizontal sync will go byebye and itll start smoking the 120K resistor in the horizontal control plate load. I have to quickly power cycle the set and its fine.
Then, the 3300ohm 5W resistor in the audio plate path is running about 5.6 to 6W so it gets too hot, tube is otherwise functioning normal so i think its mis-speccd in the service manual. Likely gotta bump that to 10W.
I also seem to have a lack of contrast as well, I have to bump it all the way. plus, the raster blooms when the brightness is cranked, HV falls to 8KV from 11KV. so possibly the 1B3 is weak as well.
