|
Wayne, it took me a while to figure out what the focus control on the back of my CC002 was for and it was not for electronic focus. It is basically a beam stripe purity adjustment like a CRT red purity adjustment. Real focus is more a mechanical tube adjustment. It comes from the factory with a center detent for red purity and there are likely finer adjustments inside but that is for others. I used a red notebook binder to check. From there I found the R/B white and black balance on the right side of the camera. Don't touch any green adjustment. On a grey scale chart, it dialed in very close under an old 8mm camera light bar on my Tek analog scope.
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.
Last edited by Dave A; 01-16-2023 at 04:59 PM.
Reason: typo
|