Quote:
Originally Posted by zeno
BTW you HAVE to change ALL the 22-5001 with the right ones if they
are white. Orange ones a good. Change them dont test them.
:
LFOD !
|
Do not overlook this advice, and don't even run it without changing those caps first. I was there when these first started failing, and boy did they drive us nuts.
Otherwise the early horizontal SS chassis was a very solid and reliable design. Most of the problems was the weak design of the module to chassis contacts. Back in the day I used to Dremel all the module contacts of these and the later vertical chassis with a wire brush and give them a thin coat of dielectric grease to avoid getting callbacks for random brightness/tint/contrast, etc. changes.
John