Quote:
Originally Posted by Alex KL-1
Certainly is a hope... is alreaby woking before 
The color vanished only after changing flyback, or when you changed components or resolder?
If only was after flyback change, maybe the pulses derived from flyback have different amplitude, upsetting circuits depentent form it, if flyback is a equivalent?
And, a very small invisible solder splotch/blob can maybe ocurred at some position (washing the PCB with isopropyl alcohol using a hard brush may solve it). |
The new flyback is an HR diamond so it's not an original. On terms of the color loss it's not a solder bridge as I changed all the caps and resolder the entire board that was done a while ago and it didn't have any trouble until now. When I still thought it was the PSU I took a couple of transistors out test and put them back. I did breck one transotor it was Q457 cupler driver which as porbly guess to horizontal optic cupler IC 469 (PS2021). I did use the NTE replacement for that transistor.