Quote:
Originally Posted by compu_85
So you'd pull the yoke apart, coat all the wires a couple times, then press them back together and give it another coat so it "holds form"?
-J
|
You don't need to make it pretty and put the windings back exactly where they were originally, just make sure the compromised windings are isolated from each other a bit (you don't need a big separation here) and then coated. If the repaired windings will get crammed against the neck of the tube when the yoke is mounted, then you can add a coating of something like Corona Dope over the windings, or clean the tube and put a couple of layers of black electrical tape on the tube (you don't want the adhesive side to touch the yoke windings.
John