|
how does a color afc become out of alignment when nothing was ever touched, it would have to be a component failure so doing an afc alignment which I cannot do in its entirety so weather the oscillator is running or not I still have to search for a bad component. If the oscillator is not running again bad resistor or cap I can’t see turning the oscillator slug to get the oscillator running again when it will probably stop again because of a bad part. The only thing I found in the oscillator is a 680ohm resistor checking at 741ohms.
Last edited by timmy; 08-04-2023 at 04:02 PM.
|