|
The phase detect resistance is not right pins 1-2 should be 1.5 and 1.6meg I’m coming up with around 500k the other 5-7 are right 220 ohm. I tried another 6al5.these pins cannot show meg ohms because there are 2 470 resistors there tied with the 1.5-1.6 meg resistors so it would only show the lower ohms of the 470 befor the high meg ohm resistors. I don’t know why sams would show this unless it’s an error
Last edited by timmy; 08-06-2023 at 10:24 AM.
|