Quote:
Originally Posted by Yamamaya42
If the SAMs is correct, and A18 should be 2.6 and you got 5.7 ohms that, that is a big problem if that is really what you got, and very likely why the old crystal won't work, again THAT is the problem if the reading is correct.
there is a flaw in the winding of the coil, or a bad solder connection
|
Well I will have to disconnect the wires going to the coil and if the ohms are still not right I will have to pull the coil and clip one leg of the 15pf because it’s parallel with the coil. If the cap is a problem it should show quickly.