Quote:
Originally Posted by timmy
I guess you could say the afc attempts failed because I never had a problem like this so Grounding point G I would not have known what was right or wrong. So the coil may show 1-2 on sams but it was actually 3-4. At least I was able to figure that out lol.
|
When I look for test points (except for tube socket pins which are well standardized or well labeled PCB or chassis stakes) I always look for 2 components that connect to the test point and trace them to their common junction to make sure I'm not on the wrong end of a resistor/capacitor or wrong lug of a coil...It's good practice and it's saved me headaches a few times. I've also seen Sam's have schematic and or typographic details wrong several times so I like to make sure everything makes sense to me.
Sometimes ( especially on point to point sets) rushing ahead without a clear understanding of what you are interacting with can lead you to accidentally changing things in a way that breaks things and is hard to find.