View Single Post
  #11  
Old 09-03-2023, 02:49 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
First step is treat it like a B&W ! Turn color off, hows the pix ?
If still streaks are still there turn off the room lights, set the brite & contrast
down low. Do they go away or get better ? Step by step......
DO NOT try an IF alignment !!!

By convention FT goes CW up in freq, CCW down. Effect is at CCW pix with no color & weak SND. As you go up the color starts to show & SND improves.
Beyond that point the pix starts to tear & go away, audio starts buzzing & pix gets wormy. At that point you are nearing the next channel ( up ) or
the FM band ( 88mhz + )if you are on ch 6.

Color edges are usually convergence. With color OFF they will still be there.

REMEMBER you need a good B&W TV to have a good color TV.

Zeno
Reply With Quote