Quote:
Originally Posted by Chris K
Thanks so much for the links. I’ll go through the resistors comprehensively with the schematic from beginning to end but I have checked most of them and replaced anything that was out of spec. Every cap in the tv has been replaced and all of the micas in the deflection circuits with exact value replacements.
|
When you replaced every resistor and capacitor with the exact value, maybe the set was adjusted in the past for a failing component and is therefore way out of adjustment.
I hate to beat a dead horse but I was lucky to find a simple problem in my RCA 630TS where the horizontal was way off frequency. I found the Horiz Freq transformer cranked all the way to one end, probably to compensate for failing components. When I put new, on value parts in, the adjustments were rock solid and in the middle of the range.
Just a thought.