|
All those .001 caps are just bypasses, so value is not critical unless lower than spec'd tolerance.
.0015 is also a bypass, but I would replace it since it's out of 10% tolerance. Note that a larger value with a wider tolerance could have been spec'd here but probably was not because the next widely available larger value would have been more expensive even with the wider tolerance.
The 100 pF is a tuning cap, so should be within spec (as it is). Correction: hard to say the 100 pF is the main tuning, but it may affect it.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Last edited by old_tv_nut; 12-17-2023 at 03:58 PM.
|