I removed the coil from the chassis and then was able to remove and measure the 8.2k resistor. The resistor measured 8.24k. Also the 36pf capacitor measures 36.14pf. I have a used pull spare transformer so I could measures against each other measure, they are very close in resistance and inductance so I assume good vs both bad.
In Use- Coil 1: 2.94 ohms (37.6uh to 68.8uh)
- Coil 2 (with center tap): .97 + 3.11 ohms (67.58uh to 120.5uh across full coil)
Spare- Coil 1: 2.91 ohms (38.27uh to 70.45uh)
- Coil 2 (with center tap): 1.03 + 3.08 ohms (68.57uh to 123.3uh across full coil)