I tried adjusting L18 with the goal of having the 3.58mc peak go up and down with color level adjustment. I also kept the B&K 415 signal turned down a bit from max. I don't know that I got it much better, video:
https://imgur.com/A9hrDx1
I have checked all of the parts in the color amp circuits and I believe they are good, I have tried alternate 1st & 2nd color amp tubes, and made coil adjustments but the 4.1mc marker always has a much stronger response and it takes the color level at about 70-75% before the curve looks correct. Note probably unrelated but the last step of the color alignment is the 3.58mc traps which I got confused on and did not adjust the traps yet.
I will reset, look everything over, try again, and report back. old_tv_nut, thank you.