Quote:
Originally Posted by Yamamaya42
Something to think about, at first my 130v rail was @ only 107V – 109V, then it was suggested that I remove one side of R130 and see what effect it had, it then came up to 138v stable, pointing me to the problem area.
I also fed capacitor coupled composite video into grid 1 of the 1st video amp (after removing the 4th IF tube), at the time and got a very good picture.
|
I'll try both of those things tonight. Previously, I sent in an IF signal through the first and then second IF stages and got a picture with the same symptoms. I haven't tried composite directly into the video amp yet.