|
You can in a pinch,use a small jeweler slot screwdriver to " squish" down the larger hole of a polarised cord to a smaller diameter.I would force the small screwdriver outside the metal connector of the larger hole and twist/bend the screwdriver around the entire circumference to force the larger connecter in.that will make it smaller. I did this many times in the past..hope this helps. RonL
__________________
Source of free vintage Canadian tv service info.Caretaker of various 1920 to 70s radios,a Farnsworth 651p tv,a RCA Ctc5 and a few 50s tvs.
Last edited by ronl; 07-12-2024 at 02:00 AM.
|