|
Looking at the schematic, it shows .01uf caps on the input line, those are too big by standards now, as mentioned above, the right type safety capacitors will work much better, also see a 270k resistor on the switch side, this might be an issue, not sure, does it make any difference if you turn the power plug around?
And of course do check resistance between primary and secondary on the power transformer, because of that resistor, it should be 270k with the fuse in, and almost infinite with the fuse removed.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
|