Quote:
Originally Posted by Chris K
I'll make the detector. Thank you for the design! There may be issues with the 8601. I don't think I'm getting RF output. Output level doesn't change. I'll need to break into it and see what's going on!
|
Without the HP8600a, the HP8601a should act as a standard signal generator. If you have a 100MHz scope, simply connect the probe to the RF output and set it to say 10MHz. Switch it to CW mode and you can ignore the sweep mode switches for a moment. Just crank up the output and set the TIME/DIV on the scope to 0.1uS per division and see if you can see a high frequency sinusoid on the scope.