I think I might need to clean the cabinet glass or what ever it is. I dont think its plastic. Will windex clean it? Waiting on novus to get here for plastic screen. Installed chassis in cabinet and of course the picture is off to the left. Why I have to crank focus coil to extreme just to get picture centered is beyond me. Maybe I should crank it and call it is what it is. I have the converter box set to 4:3 full aspect ratio. Maybe this chassis was dropped and somehow its bent or needs the tube repositioned. Focus knob is almost to one end so by suggestion, focus coil is still off so if I get focus knob centered then adjust focus coil done. Maybe center the knob and adjust for best focus based on focus coil adjustment farther or closer to tube face? Messed with focus coil again, focus knob ect. focus knob comes in at almost full rotation.
Cant find my usb to put up test image. b & k 1210 test generator I bought has super crappy test image so needs a recap???
Screwed with focus coil and ion trap again and now picture is a hair to the right. Needs to go left a bit. Will post a picture of a test pattern if I locate my usb thumb drive. I guess moving focus coil back out did the centering trick but not sure how to get focus adjustment back in range and centered on knob.
