Quote:
Originally Posted by bandersen
Here's a look inside.
21FJP22 work up after a couple minutes and tests like new.
Yoke, degaussing coil and grounding wire were found disconnected.
All the tubes except for horizontal / HV stuff are original GE date late 1964. All test like new.
6JS6, 3A3C and 6EL6 are RCA branded.
Tried a slow power up and quickly realized the is no B+. Only the filaments are getting power. Likely the circuit breaker is shot.
Trying to pull the chassis right now. |
Also, As you showed in your video, the degaussing coil was unplugged, (plugs into left side of chassis), if this is not plugged in, and the VDR/thermistor combo is bad, it will also kill all power, as it's in line with the breaker, the diode pair seemed rather robust in this set, almost overbuilt, they could go bad, but so far, I have not seen any in the few color sets I have done.