|
Well...in typical me fashion, I didn't encounter the need for the voltage range adjustment on the VTVM all the way through step 15 on the alignment table this time through. I was able to do all of them on the 1.5V scale. I had a difficult time turning the bottom adjustment for step 15, the bottom of T102. I didn't want to push it and break the coil/slug. I'm wondering if I should check the video and sound quality and if the sound and picture are in sync when a signal is sent in from my VA62 and I tune in the set channel for the RF input? I'm going to need help with steps 16 and 17 anyway. Pretty complicated for this numbskull.
|