Thread: Ok. Let’s try this again…RCA 9TC240 Alignment
View Single Post
  #10  
Old 09-17-2024, 01:09 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
  
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,462
Quote:
Originally Posted by Chris K View Post
No I didn't think so. I was injecting the frequencies at around 200mV into V2 Pin1 through the 1500pF cap. I was not getting swings anything like 1.0-2.0 volts DC. Is 200mV not strong enough???
200mV is way too low. I would go back and increase the RF signal applied.
Reply With Quote
Audiokarma