[fumplet]

Yes Image is back....knocking the ion trap while flipping chassis over made image go away compounded by the fact i turned the brightness knob down all the way and left it there while tweaking ion trap magnet so basically im my worst enemy here. Now image is back onceci figureed out ion trap and brightness were way off . I ordered 6v6 tubes anyway. I THINK chassis said run 18. It does have 2 fuses which the later sets had according to schematic. The focus was centered at one long ago but i must have done something to make it not centered unless maybe the vertical out put transformer going bad was the cause of focus adjustment going in and out of centered adjustment
I did find out that if you use the wrong power supply, the focus will be off so if you possably are using the 4 tube power supply in a set that required a 6 tube power supply that would cause focus to be at one extreme.