Quote:
Originally Posted by Doug
There should be reel sensors under each reel.
Check the pulse on those.
Usually under the reels is a reflector with black stripes.sometimes
The black comes off or the reflector is dirty
|
Looks like my reels have crenelations with an IR LED and photosensor on either side that reads the light as it passes.
Quote:
Originally Posted by redk9258
I'm not familiar with your model but it was built shortly after my HR-D470U. The mechanism looks similar but not exact. On my model the bottom panel comes off and if I remember correctly, you have to unsolder a couple of wires to gain access to the mode switch. I could be mixing this up with changing the mode belt too. LOL
|
Mine is behind a plastic cage.
Some of the stuff is accessible.