Quote:
Originally Posted by redk9258
Be careful if you remove that bottom plate to change the belt. Things must be kept in time. There should be information in the service manual.
|
The service manual is not very detailed from a mechanical standpoint. It doesn't tell you in any great detail what to do. I
assume from the order things are laid out, I disassemble the head assembly, followed by the Audio Control assembly (which is attached that arm that I can't remove.), followed by the tension band assembly, followed by the control arm assembly, followed finally by the control cam assembly. I guess? ¯\_(ツ)_/¯
And nowhere does it tell you what type of screws, in what order, or where they're even located.
If I owned a scope, the service manual would be invaluable as it shows all the waveforms for everything.