|
Well the cap in this set is 1.4kv at .0055mmf and it's the only one that goes up to 1000v+ range. The cap is film and case had no cracks as well the cap tested ok at least with my multimeter. I also checked all the ceramic caps in the horizontal area too and found nothing broken.
The stk I'm not sure on how to test and in the past I did resolder the stk back when I first got the set. I did find short to ground threw c520 and If I removed c520 both pads are still shorted to ground. The cap is disk cap 330p at 500v.
|