Quote:
Originally Posted by Aperna1985
So Pin 2 of the octal base connector which would be a violet wire would connect to pin 1 of the black and white plug which would be the heater?
|
That is correct.
Quote:
Originally Posted by Aperna1985
The drawing that you have doesn't mention any yellow wires. I have three yellow wires coming out of the 14 pin color connector and two yellow wires coming out of the 14 pin black and white.
|
It does. Pin 8 of the octal plug has the yellow wire connected. This connects to pin 11 of the 12-pin B&W connector and pins 4, 5, and 13 of the 14-pin color connector. These are the cathodes.
Quote:
Originally Posted by Aperna1985
There's also a white wire coming from the Octal plug that isn't attached to anything.
|
Check which pin this white wire connects to in the octal plug. If it isn't connected to any of the pins used then it won't be used.