|
A few other things, I pulled the selenium rectifier to check it, all three diodes checked out. I replaced them with 4007s instead of putting the selenium back. Vertical convergence isn't bad, but for some reason the horizontal bars are WAY too thick. It's gotta be a generator thing. (I'm still seeing evidence of a ghost red image 1/8" to the right of all red images) The vertical bars are thinner than a pencil body, but the horizontal bars are as thick as a sharpie. I've had to redo the center convergence like 3 or 4 times as I do the rest of the convergence. The horizontal will not converge because the thickness of the lines is different. Red is the thickest, blue green are about equal
I've noticed a focus issue, where it's running out of range before it focuses completely. I popped open the HV cage and the 66Meg resistor stack was measuring 98Meg. I put in one of the bumblebee 66Meg resistors to hopefully solve that issue.
Still debating on a fan or not. Definately some fresh wax after running it for an hour
__________________
"If it isn't broke, you aren't trying hard enough"
|