No brush needed, fumes only when wet, and very mild!
https://mgchemicals.com/products/sol...for-pc-boards/
91% IPA if I run out - and sparingly, as I use Kester 44, so no added flux needed. Same stuff all micro-min soldering shops used in the Navy.....Kester 44 in .031 and .020, i also have some older Kester 33 in .031 and .062
https://www.amazon.com/Kester-24-633...149K4JTY&psc=1
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|