Started removing the chassis today. When removing the HV rectifier tube it seems I tore the lead off the flyback transformer.
Based on the diagram, it only has 1 wire, I think I can solder it back on.
Although on further inspection, I found the High voltage cable to the CRT covered in electrical tape. I think I should replace this cable, but will need to source a part.
Send me a PM if you have either a flyback or HV cable!
(
sent Moyer electronics an email to see if they have one)
Philco 32-8853-1 Or Thordarson FLY 196
PXL_20250416_211931175 by
Thomas Duncan, on Flickr
PXL_20250416_211947564 by
Thomas Duncan, on Flickr
PXL_20250416_215904771 by
Thomas Duncan, on Flickr
PXL_20250416_215917947 by
Thomas Duncan, on Flickr
PXL_20250416_212223555 by
Thomas Duncan, on Flickr
PXL_20250416_212558863 by
Thomas Duncan, on Flickr
PXL_20250416_212740986 by
Thomas Duncan, on Flickr
PXL_20250416_213140780 by
Thomas Duncan, on Flickr
PXL_20250416_213416126 by
Thomas Duncan, on Flickr