Quote:
Originally Posted by Chris K
I’ll get on that and back to all of you midday tomorrow. I don’t know how much drift from the 0.56 ohm the regulator function tolerates and my comment earlier that it is “spot on” isn’t exactly accurate. My test leads have around 0.3 ohms of internal resistance and I’m getting around 0.9 ohms when I measure it so accuracy to within 0.01 ohms isn’t something my DMM can do.
|
Chris,
If you by chance have an accurate reading ESR meter, that would be ideal for reading such a low value resistor value. The one I have allows you to zero out the test leads resistance.