|
Those are just arbitrary numbers I put on the pins starting at one at near 12 o’clock. They aren’t labeled as you would count them on the transistor. It continued to work fine. What typically happens with this is there’s really no resolution and I button it back up, it works for a while and then starts with issues again. I think what I’m going to try is to mount a small cooling fan on the side blowing into the cabinet. If heat buildup is the issue, maybe that’ll solve it. I am going to replace the resistor with a new 1% 0.56 ohm wire wound resistor as it is supposed to have. As long as I have it open I’ll replace it.
|